Tail-board introduction

Sanneng Automobile tailgate is a cantilever type loading and unloading device. It is installed in the tail of trucks and various closed vehicles. It is a large board weighing about 300 to 600 kilograms. It is a hydraulic lifting handling equipment powered by vehicle battery. It has all the functions of loading and unloading of the forklift truck, and all the tail plates on the forklift are equipped with motors, valve blocks, high pressure pumps, cylinders, lifting devices, control switches and so on. The installation of the three-energy tailgate can greatly improve the transportation and loading and unloading efficiency. The three-energy tailgate is one of the necessary equipment for modern logistics transportation. It has all the functions of loading and unloading of the forklift truck, and all the tail plates on the forklift are equipped with motors, valve blocks, high pressure pumps, cylinders, lifting devices, control switches and so on. The installation of the three-energy tailgate can greatly improve the transportation and loading and unloading efficiency. The three-energy tailgate is one of the necessary equipment for modern logistics transportation.

Fill an 8 ton car full of cargo. If it is handled by manpower, it takes 5-8 hours. If you use the three-end tailgate, it only takes half an hour, and the personnel should save 80%. The saved staff can buy for half a year. A tailgate.

The three-energy tailgate produced by Shenzhen Sanneng Electromechanical Equipment Co., Ltd. has the following characteristics compared with similar products:

  1. 1. The hydraulic cylinders are all made of nickel-plated pistons and dust-proof rubber sleeves.
  2. 2. The hydraulic station has built-in flow control valve to adjust the lifting and turning speed.
  3. 3. Built-in three-way protection switch can effectively avoid the burning of the circuit or motor when the vehicle circuit is short-circuited, the battery voltage is low or the current is too large, and the tail plate is overloaded.
  4. 4. The explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the tailgate and cargo damage caused by the bursting of the oil pipe.
  5. 5. All the anti-collision bars are separated from the tailgate and the tailgate of the car to avoid damage caused by long-term collision of the tailgate of the car.
  6. 6. All cylinders of the three-energy tailgate are made of thickened cylinders. The cylinders are strong and durable, so there is no need to install a hanging bumper at the bottom of the tailgate to protect the cylinders.
  7. 7. The circuit is equipped with a safety protection system that automatically cuts off the power when the tailgate rises to level with the car.
  8. 8. The core of the tailgate---the power system adopts the world's or domestic famous brand with the largest market share.
  9. 9. An 8 ton car is full of cargo. If it is handled by manpower, it takes 5-8 hours. If it is a three-tail plate, it takes only half an hour and the personnel should save 80%.
  10. 10. It has all the functions of loading and unloading of the forklift truck, and all the tail plates on the forklift are equipped with motors, valve blocks, high pressure pumps, cylinders, lifting devices, control switches and so on. The installation of the three-energy tailgate can greatly improve the transportation and loading and unloading efficiency. The three-energy tailgate is one of the necessary equipment for modern logistics transportation.

Now Sanren tailboard has been widely used in paper, printing, hardware, chemical, electronics, electrical, financial, postal, logistics, transportation, sanitation and many other fields, and is well received by users.